select




OSHA One-Day Seminars



Bloodborne Pathogen Exposure Control for Healthcare Facilities - OSHA 7200

Course Description:

How to develop a bloodborne pathogens exposure plan for healthcare facilities using a step-by-step approach, including an introduction to the bloodborne pathogens standard, the exposure control plan, exposure determination, methods of control, vaccinations and evaluations, training and information and record keeping.

 Topics include:

  • Control methods
  • Exposure Control Plans
  • Exposure determination methods
  • Introduction to standard
  • Medical requirements
  • Recordkeeping
  • Training requirements

Prerequisites: None

Continuing Education Units (CEUs): 0.8

 

PLEASE NOTE: ZOOM Pilot Classes are limited in size and only open to participants located in California, Arizona, Nevada, Hawaii, Guam or American Samoa only. No transfers or refunds fewer than 10 days prior to class.



Add Location Instructor Dates Days Times Fees Details Open
Register Now!
Dublin, CA
OSHA Training Institute Education Center
Hamaker 10/16 - 10/16 Fr 08:00 AM - 05:00 PM $275.00 View

Evacuation and Emergency Planning - OSHA 7105

Course description:

Preparing for emergencies is a basic principle of workplace safety and health. Participants will learn reasons for emergency action plans and fire prevention plans and when they are required for a workplace; elements of a good evacuation plan and the OSHA requirements for plans; and features of design and maintenance of good exit routes.

Who Should Attend:

The small employer, business owner, or a representative designated with the responsibility to plan for emergencies and evacuation procedures.

Course Benefits:

  • List the elements of an emergency action plan and emergency evacuation floor plans
  • Recognize violations of OSHA exit route requirements
  • Identify terrorism risk factors in the workplace
  • Describe a process to prioritize risks
  • Develop and implement workplace emergency action and fire protection plans

Topics include:

  • Emergency action and fire prevention plans
  • Emergency evacuation plans
  • Design and maintenance of emergency exit routes
  • Chemical spills
  • Radiological accidents
  • Civil disturbances
  • Workplace violence resulting in bodily harm and trauma
  • Floods
  • Hurricanes
  • Tornadoes
  • Chemical or biological weapon attacks
  • Toxic gas releases

Prerequisites: None

Days: 1

Continuing Education Units (CEUs): 0.8



Add Location Instructor Dates Days Times Fees Details Open
Register Now!
Dublin, CA
OSHA Training Institute Education Center
Schulze 9/11 - 9/11 Fr 08:00 AM - 05:00 PM $275.00 View

Health Hazard Awareness - OSHA 7205

Course Description:

Exposure to health hazards continues to be common in spite of advances in control measures and techniques. This course provides an introduction to common health hazards that are encountered in the workplace. This course focuses on recognizing/identifying potential hazards, and avoiding, minimizing, controlling or eliminating them whenever possible. Health hazards will include exposure to chemicals, asbestos, silica and lead. The course is designed as an awareness course for employers and employees.

Topics include:

  • Identification of hazards
  • Sources of exposure
  • Health hazard information
  • Evaluation of exposure
  • Engineering and work practice controls

Prerequisites: None

Day(s):

Continuing Education Units (CEUs): 0.8



Additional Information

Add Location Instructor Dates Days Times Fees Details Open
Register Now!
Zoom Class Location
TBD
Decker 6/8 - 6/9 Mo Tu 01:00 PM - 04:30 PM $275.00 View

Introduction to Safety and Health Management - OSHA 7500

Course Description:

This introductory course addresses the four core elements of an effective safety and health program with strategies & techniques that are critical to each element’s proper management. The course is designed for the small employer, business owner or manager designated with the responsibility to develop and manage a firm’s safety and health program or system.Students develop a strong understanding of the benefits of implementing a safety and health management system in the workplace.

Topics include:

  • Overview of a safety and health management system
  • Management leadership and employee involvement
  • Work site analysis
  • Hazard prevention and control
  • Safety and health training
  • Evaluating your program

Prerequisites: None

Days: 1

Continuing Education Units (CEUs): 0.8

 

PLEASE NOTE: ZOOM Classes are limited in size and only open to participants located in California, Arizona, Nevada, Hawaii, Guam or American Samoa only. No transfers or refunds fewer than 10 days prior to class.



Add Location Instructor Dates Days Times Fees Details Open
Cancelled
Oxnard, CA
Ventura County Contractors Association
Monod de Froideville 5/29 - 5/29 Fr 08:00 AM - 05:00 PM $275.00 View
Register Now!
Zoom Class Location
TBD
Hosier 6/8 - 6/9 Mo Tu 08:00 AM - 12:00 PM $275.00 View

Lockout/Tagout - OSHA 7115

Course description:

This course focuses on the roles and responsibilities of the employer to develop and implement an energy control program, or lock-out/tag-out (LOTO) for the protection of workers while performing servicing and maintenance activities on machines and equipment. Students will learn how to detect hazardous conditions and implement control measures as they relate to the control of hazardous energy, written isolation procedures, training for authorized and affected employees, and periodic inspection of energy control procedures. Topics include the understanding and application of definitions relating to OSHA’s Control of Hazardous Energy Standard, types of hazardous energy, energy isolation options and written program requirements.

Course Benefits:

  • Learn the importance of energy control programs, procedures, training, audits and methods of controlling hazardous energy

  • Demonstrate the knowledge and skills required to safely perform servicing and maintenance activities

  • Describe the process of conducting an audit as it pertains to LOTO

 Topics include:

  • Understanding and application of definitions relating to OSHA's Control of Hazardous Energy Standards

  • Types of hazardous energy

  • Energy isolation options

  • Periodic inspections

  • Required training

  • Energy control program and procedures

  • Training guidelines

 

Prerequisites: None

Days:

Continuing Education Units (CEUs): 0.8

 

PLEASE NOTE: ZOOM Pilot Classes are limited in size and only open to participants located in California, Arizona, Nevada, Hawaii, Guam or American Samoa only. No transfers or refunds fewer than 10 days prior to class.



Add Location Instructor Dates Days Times Fees Details Open
Register Now!
Santa Rosa, CA
North Coast Builders Exchange
Cushman 9/18 - 9/18 Fr 08:00 AM - 05:00 PM $275.00 View
Register Now!
Dublin, CA
OSHA Training Institute Education Center
Schulze 10/10 - 10/10 Sa 08:00 AM - 05:00 PM $275.00 View
Register Now!
Sacramento, CA
Sacramento Regional Builders Exchange
Henriques 11/6 - 11/6 Fr 08:00 AM - 05:00 PM $275.00 View

Managing Excavation Hazards - OSHA 7410

Course description:

In this one-day course, students will learn about the role and responsibility of the employer to assign a competent person to the excavation site and arm that person with the knowledge to perform the work properly. Topics include the understanding and application of definitions relating to OSHA’s Excavation Standard (Subpart P), excavation hazards and control measures, soil analysis techniques, protective system requirements and emergency response. 

At the conclusion of this course, the participant will understand the importance and duties of a competent person towards excavation work and will gain knowledge and skills that are required to perform excavation duties.

Learn To:

  • Understand the importance and duties of a competent person in excavation work
  • Identify hazards associated with excavation work and be able to select measures to eliminate or control those hazards

Topics include:

  • Understanding and application of definitions relation to OSHA’s Excavation Standard (1926 Subpart P)
  • Excavation hazards and control measures
  • Soil analysis techniques
  • Protective system requirements
  • Emergency response

Prerequisites: None

Days: 1

Continuing Education Units (CEUs): 0.8

 

PLEASE NOTE: ZOOM Pilot Classes are limited in size and only open to participants located in California, Arizona, Nevada, Hawaii, Guam or American Samoa only. No transfers or refunds fewer than 10 days prior to class.



Add Location Instructor Dates Days Times Fees Details Open
Cancelled
Honolulu, HI
Airport Conference Center
Decker 6/18 - 6/18 Th 08:00 AM - 05:00 PM $275.00 View

Silica in Construction, Maritime and General Industries - OSHA 7215

Course Description:

This course covers the development and implementation of controls and strategies to prevent or mitigate silica exposures in construction, maritime, and general industries. Course topics include describing the requirements of OSHA's Respirable Crystalline Silica standards and recognizing the hazards and risks, assessment options, and exposure control measures associated with silica exposure.

Topics include:

  • Crystalline Silica - Characteristics, Application, Health Effects
  • Exposure Assessment Options 
  • Exposure Control Methods (Engineering, Work Practices and PPE)
  • Housekeeping
  • Role of the Competent Person
  • Medical Surveillance
  • Recordkeeping
  • Written Programs (requirements, development exercises and templates)

 

Prerequisites: None

Days: 1

Continuing Education Units (CEUs): 0.8



Add Location Instructor Dates Days Times Fees Details Open
Register Now!
Dublin, CA
OSHA Training Institute Education Center
DeBusk 7/9 - 7/9 Th 08:00 AM - 05:00 PM $275.00 View
Register Now!
Sacramento, CA
Safety Center Inc
DeBusk 10/16 - 10/16 Fr 08:00 AM - 05:00 PM $275.00 View

Transitioning to Safer Chemicals - OSHA 7225

Course description:

This course covers a proactive approach to reducing the use of hazardous chemicals in the workplace by transitioning to safer alternatives. In particular, participants will use OSHA's seven-step substitution planning process. The course features workshops and hands-on activities with the use of various online chemical databases and tools.

Who should attend:

The ideal audience is purchasing staff, maintenance supervisors, facility managers, and workers who utilize hazardous chemicals at their worksites, along with occupational safety and health professionals who provide technical assistance on the control of chemical hazards.

Upon course completion participants will have the ability to recognize and evaluate hazardous chemicals in their workplace, assess safer alternatives, and implement those alternatives.

Topics Include:

  • Evaluating and assessing current chemical usage
  • Identification and comparison of safer alternatives
  • Safer chemical selection
  • Implementation alternatives

NOTE: Students are strongly encouraged to bring a laptop computer (or other device) with Wi-Fi capabilities for use during this course.

Prerequisites: None

Days: 1

Continuing Education Units (CEUs): 0.8



Add Location Instructor Dates Days Times Fees Details Open
Register Now!
Honolulu, HI
Airport Conference Center
Decker 12/21 - 12/21 Mo 08:00 AM - 05:00 PM $275.00 View

Understanding OSHA's Permit-Required Confined Space Standard - OSHA 7300

Course Description:

An introduction to the requirements of OSHA’s permit-required confined space standard, 29 CFR 1910.146. It is designed for small employers or a designated representative (line supervisor or manager) with the responsibility to develop a permit space program. Does not feature hands-on exercise.


Learn about OSHA's requirements for developing a permit-required space program

Topics include:

  • Scope and definitions
  • General requirements
  • Permit space program
  • Training requirements
  • Employee roles and rescue

Prerequisites: None

Days:

Continuing Education Units (CEUs): 0.8

 

PLEASE NOTE: ZOOM Pilot Classes are limited in size and only open to participants located in California, Arizona, Nevada, Hawaii, Guam or American Samoa only. No transfers or refunds fewer than 10 days prior to class.



Add Location Instructor Dates Days Times Fees Details Open
Register Now!
Zoom Class Location
TBD
Glover 6/12 - 6/12 Fr 08:00 AM - 05:00 PM $125.00 View
Register Now!
San Luis Obispo, CA
San Luis Obispo Builders Exchange
Hatch 8/6 - 8/6 Th 08:00 AM - 05:00 PM $275.00 View